Honeywell HH490 - CHAPTER 11 - PRODUCT SPECIFICATIONS; HH490 Scanner Product Specifications

HH490 User Guide 179
Selection
Setting
* Indicates default
Serial Command #
Indicates a numeric entry
Page
Code 128 Append *On 128APP1 98
Off 128APP0 98
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 98
GS1-128 Default All GS1-128 Settings GS1DFT 98
*On GS1ENA1 99
Off GS1ENA0 99
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 99
Maximum (0 - 80) *80 GS1MAX## 99
Telepen Default All Telepen Settings TELDFT 99
*Off TELENA0 99
On TELENA1 99
Telepen Output *AIM Telepen Output TELOLD0 100
Original Telepen Output TELOLD1 100
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 100
Maximum (1 - 60) *60 TELMAX## 100
UPC-A Default All UPC-A Settings UPADFT 100
Off UPBENA0 101
*On UPBENA1 101
UPC-A Check Digit Off UPACKX0 101
*On UPACKX1 101
UPC-A Number System Off UPANSX0 101
*On UPANSX1 101
UPC-A 2 Digit Addenda *Off UPAAD20 102
On UPAAD21 102
UPC-A 5 Digit Addenda *Off UPAAD50 102
On UPAAD51 102
UPC-A Addenda Required *Not Required UPAARQ0 102
Required UPAARQ1 102
Addenda Timeout Range (0 - 120) *120 DLYADD##### 103
UPC-A Addenda
Separator
Off UPAADS0 103
*On UPAADS1 103
UPC-A/EAN-13 with Extended
Coupon Code
*Off CPNENA0 103
Allow Concatenation CPNENA1 103
Require Concatenation CPNENA2 103
Addenda Timeout Range (0 - 120) *120 DLYADD##### 104
Coupon GS1 DataBar Output *GS1 Output Off CPNGS10 104
GS1 Output On CPNGS11 104
UPC-E0 Default All UPC-E Settings UPEDFT 104
Off UPEEN00 105