EasyManuals Logo

Honeywell Thor VM3 User Manual

Honeywell Thor VM3
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
98 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Screen Blanking
Prerequisite: The steps outlined in either 12-48 VDC Vehicles (10-60 VDC Direct
Connection), 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid) or
60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid) have been com-
pleted.
Screen blanking is accomplished by either a Screen Blanking Box or a user supplied
switch.
Fuse Requirements
Note: For North America, a UL Listed fuse is to be used.
Screen Blanking Cable
When routing any additional cables for screen blanking:
Route the cable the shortest way possible removing any left-over cable
Fuses and cabling are user supplied. Therefore, route these cables so they are
protected from physical damage and from surfaces that might exceed the cable's
rated temperature threshold.
Cable should be protected from physical damage from moving parts
Do not expose the cable to chemicals or oil that may cause the wiring insulation to
deteriorate
Always route the cable so that it does not interfere with safe operation and
maintenance of the vehicle.
Provide mechanical support for the cable by securing it to the vehicle structure at
approximately one foot intervals, taking care not to over tighten and pinch
conductors or penetrate outer cable jacket.
Honeywell Screen Blanking Box Cable
An optional Honeywell Screen Blanking Box Cable is available.
Caution: For installation by trained service personnel only.
Warning: For proper and safe installation, the input power lead to the
Screen Blanking Box requires a 3 Amp maximum time delay
(slow blow) high interrupting rating fuse.

Table of Contents

Other manuals for Honeywell Thor VM3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Thor VM3 and is the answer not in the manual?

Honeywell Thor VM3 Specifications

General IconGeneral
SteppingD0
Tjunction-40 °C
FSB ParityNo
Processor codeSR1X8
Processor cache1 MB
Processor cores2
Processor modelE3826
System bus rate- GT/s
Processor familyIntel Atom®
Processor codenameBay Trail
Processor frequency1.46 GHz
Processor cache typeL2
Processor manufacturerIntel
Processor package size25 x 27 mm
Conflict-Free processorYes
Processor front side bus- MHz
Processor operating modes32-bit, 64-bit
Graphics & IMC lithography22 nm
PCI Express configurations1x1, 1x4, 2x1
Thermal Design Power (TDP)7 W
Internal memory4 GB
Internal memory typeDDR3-SDRAM
Storage mediaFlash
Compatible memory cards-
Internal storage capacity64 GB
Display diagonal12.1 \
Display brightness900 cd/m²
Display resolution1024 x 768 pixels
Graphics cardHD Graphics
Rear camera resolution (numeric)- MP
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version2.0+EDR
Top Wi-Fi standardWi-Fi 4 (802.11n)
HDMI ports quantity0
USB 2.0 ports quantity1
I/O ports1x CAN-bus, RF
Processor ARK ID78477
Processor socketBGA 1170
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)5 - 95 %
PlatformWindows
Bundled softwareData Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installedWindows 7
AC adapter input voltage90 - 240 V
Battery capacity- mAh
Battery life (max)0.5 h
CertificationEN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device typeTablet PC
Form factorSlate
Product colorGrey, Silver
Protection featuresShock resistant, Vibration proof, Water resistant
International Protection (IP) codeIP66
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth62 mm
Width318 mm
Height260 mm
Weight3000 g

Related product manuals