EasyManuals Logo

Honeywell Thor VM3 User Manual

Honeywell Thor VM3
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide 147
This section is not intended to detail all features of the BIOS, instead it is intended to
cover the most commonly used setup options.
Accessing the BIOS Setup
To access and modify the BIOS on the Thor VM3, an external keyboard must be
attached.
When the Press F2 for System Utilities prompt is displayed at power up, press the P2 key
on the Thor VM3 or the F2 key on an external keyboard to enter BIOS setup.
Use the arrow keys to move around the screen.
Boot Order
To view or edit the boot order, select the Boot tab.
By default, the first device in the boot order is USB Hard Drive.
The boot drive can also be selected at bootup. Press P5 from the Thor VM3 keypad or
press F5 from an external keyboard. Use the arrows on the external keypad to make a
selection. This does not change the default boot order and the next bootup will return to
the default drive without user intervention.
Exiting BIOS Setup
To exit the BIOS setup, select the Exit tab and select one of these options:
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults for WEC 7 (do not use options for other operating systems as
this can cause unexpected results)
Caution: Be very careful when using this utility to modify BIOS Setup
parameters. The Thor VM3 may generate unexpected results
when incorrect or conflicting parameter values are entered.
Selecting incorrect or invalid options may require the Thor VM3
to be returned for repairs.
The parameters should only be modified by Information
Services personnel or the system administrator.

Table of Contents

Other manuals for Honeywell Thor VM3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Thor VM3 and is the answer not in the manual?

Honeywell Thor VM3 Specifications

General IconGeneral
SteppingD0
Tjunction-40 °C
FSB ParityNo
Processor codeSR1X8
Processor cache1 MB
Processor cores2
Processor modelE3826
System bus rate- GT/s
Processor familyIntel Atom®
Processor codenameBay Trail
Processor frequency1.46 GHz
Processor cache typeL2
Processor manufacturerIntel
Processor package size25 x 27 mm
Conflict-Free processorYes
Processor front side bus- MHz
Processor operating modes32-bit, 64-bit
Graphics & IMC lithography22 nm
PCI Express configurations1x1, 1x4, 2x1
Thermal Design Power (TDP)7 W
Internal memory4 GB
Internal memory typeDDR3-SDRAM
Storage mediaFlash
Compatible memory cards-
Internal storage capacity64 GB
Display diagonal12.1 \
Display brightness900 cd/m²
Display resolution1024 x 768 pixels
Graphics cardHD Graphics
Rear camera resolution (numeric)- MP
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version2.0+EDR
Top Wi-Fi standardWi-Fi 4 (802.11n)
HDMI ports quantity0
USB 2.0 ports quantity1
I/O ports1x CAN-bus, RF
Processor ARK ID78477
Processor socketBGA 1170
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)5 - 95 %
PlatformWindows
Bundled softwareData Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installedWindows 7
AC adapter input voltage90 - 240 V
Battery capacity- mAh
Battery life (max)0.5 h
CertificationEN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device typeTablet PC
Form factorSlate
Product colorGrey, Silver
Protection featuresShock resistant, Vibration proof, Water resistant
International Protection (IP) codeIP66
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth62 mm
Width318 mm
Height260 mm
Weight3000 g

Related product manuals