EasyManuals Logo

Honeywell Thor VM3 User Manual

Honeywell Thor VM3
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
146 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Use ActiveSync to back up Thor VM3 user files and store them elsewhere before
beginning an upgrade on the Thor VM3.
Maintain an uninterrupted AC/DC power source to the Thor VM3 throughout this
process.
The mSATA card with the OS and systems files must be present for the Thor VM3 to
boot.
Always perform OS updates when the Thor VM3 has a dependable external power
source connected to the Thor VM3.
Procedure
1. Verify a dependable power source is applied to the Thor VM3 and will stay connected
during the upgrade procedure.
2. Copy the OS files to a USB thumb drive.
3. Copy the files from the USB drive to the Thor VM3's System folder.
4. During the file copy process to the Thor VM3 System folder, when asked
“Overwrite?”, select Yes to All.
5. Review the files that were downloaded to the System folder.
6. Remove the USB drive.
7. Restart the Thor VM3.
8. When the OS finishes loading, check the OS update version by selecting Start >
Settings > Control Panel > About > Software tab.
The touch screen may require calibration, however some Windows OS versions save the
calibration data, eliminating the need to calibrate.
If the Thor VM3 won't boot up after the upgrade is finished, contact Technical
Assistance for re-imaging options.
BIOS
The Microsoft Windows Embedded Compact operating system is installed before ship-
ping. The default BIOS parameters are configured at that time. In most cases, it is
unnecessary to modify the BIOS parameters.
Generally, it is only necessary to enter the BIOS setup to change the boot order of the
drives.

Table of Contents

Other manuals for Honeywell Thor VM3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Thor VM3 and is the answer not in the manual?

Honeywell Thor VM3 Specifications

General IconGeneral
SteppingD0
Tjunction-40 °C
FSB ParityNo
Processor codeSR1X8
Processor cache1 MB
Processor cores2
Processor modelE3826
System bus rate- GT/s
Processor familyIntel Atom®
Processor codenameBay Trail
Processor frequency1.46 GHz
Processor cache typeL2
Processor manufacturerIntel
Processor package size25 x 27 mm
Conflict-Free processorYes
Processor front side bus- MHz
Processor operating modes32-bit, 64-bit
Graphics & IMC lithography22 nm
PCI Express configurations1x1, 1x4, 2x1
Thermal Design Power (TDP)7 W
Internal memory4 GB
Internal memory typeDDR3-SDRAM
Storage mediaFlash
Compatible memory cards-
Internal storage capacity64 GB
Display diagonal12.1 \
Display brightness900 cd/m²
Display resolution1024 x 768 pixels
Graphics cardHD Graphics
Rear camera resolution (numeric)- MP
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version2.0+EDR
Top Wi-Fi standardWi-Fi 4 (802.11n)
HDMI ports quantity0
USB 2.0 ports quantity1
I/O ports1x CAN-bus, RF
Processor ARK ID78477
Processor socketBGA 1170
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)5 - 95 %
PlatformWindows
Bundled softwareData Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installedWindows 7
AC adapter input voltage90 - 240 V
Battery capacity- mAh
Battery life (max)0.5 h
CertificationEN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device typeTablet PC
Form factorSlate
Product colorGrey, Silver
Protection featuresShock resistant, Vibration proof, Water resistant
International Protection (IP) codeIP66
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth62 mm
Width318 mm
Height260 mm
Weight3000 g

Related product manuals