Honeywell Thor VM3 User Manual

216 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
f. Review the Software tab of the About to verify the installed firmware versions.
Compare the digits from the name of the cab file (see above) with those shown in
the About control panel.
Configuration Cloning Utility (CCU)
This utility provides an automated process to read the configuration settings from one
Thor VM3 and then apply those settings to one or more other Thor VM3s with the same
operating system. The Configuration Cloning Utility (CCU) is installed as part of the fac-
tory software load. Configuration settings for the following items may be included:
•RFTerm
• Honeywell Control Panels:
• USB powered in Sleep
• Enable/disable touch screen
• Defroster settings
• COM port pin 9 +5V or RI
The CCU allows a configuration file (ccf file) to be created by:
• Reading the current program settings from the source Thor VM3
• Reading the default program settings from a ddf file.
If desired, settings can be modified (advanced user only) before saving the ccf file. If any
changes have been made, the CCU can also apply them to the source Thor VM3.
The configuration file can then be copied and deployed to the destination Thor VM3(s).
Options include:
• Import changes only - Only those configuration settings which have been modified
from their default value are applied to the destination Thor VM3. All other settings on
the destination Thor VM3 are left unchanged.
• Import changes and defaults - All configuration settings are applied to the
destination Thor VM3. If a setting was modified on the source Thor VM3 the modified
value is applied to the destination Thor VM3. Otherwise the default value is applied
for that setting on the destination Thor VM3.
The Configuration Cloning Utility can be run as a GUI or command line interface.
Configuration Cloning Utility GUI
To launch the Client Configuration Utility, locate the CCU icon either on the desktop or
by selecting Start > Programs > CCU.

Honeywell Thor VM3 Specifications

General

Stepping	D0
Tjunction	-40 °C
FSB Parity	No
Processor code	SR1X8
Processor cache	1 MB
Processor cores	2
Processor model	E3826
System bus rate	- GT/s
Processor family	Intel Atom®
Processor codename	Bay Trail
Processor frequency	1.46 GHz
Processor cache type	L2
Processor manufacturer	Intel
Processor package size	25 x 27 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor operating modes	32-bit, 64-bit
Graphics & IMC lithography	22 nm
PCI Express configurations	1x1, 1x4, 2x1
Thermal Design Power (TDP)	7 W
Internal memory	4 GB
Internal memory type	DDR3-SDRAM
Storage media	Flash
Compatible memory cards	-
Internal storage capacity	64 GB
Display diagonal	12.1 \
Display brightness	900 cd/m²
Display resolution	1024 x 768 pixels
Graphics card	HD Graphics
Rear camera resolution (numeric)	- MP
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
HDMI ports quantity	0
USB 2.0 ports quantity	1
I/O ports	1x CAN-bus, RF
Processor ARK ID	78477
Processor socket	BGA 1170
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Platform	Windows
Bundled software	Data Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installed	Windows 7
AC adapter input voltage	90 - 240 V
Battery capacity	- mAh
Battery life (max)	0.5 h
Certification	EN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device type	Tablet PC
Form factor	Slate
Product color	Grey, Silver
Protection features	Shock resistant, Vibration proof, Water resistant
International Protection (IP) code	IP66
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	62 mm
Width	318 mm
Height	260 mm
Weight	3000 g