Honeywell Thor VM3 User Manual

52 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Overhead, dash and roof support pillar mounting is via a RAM Mount or U-bracket
accessory which includes all the hardware required for vehicle mounting.
Never put the Thor VM3 into the vehicle mounted assembly until the assembly is
securely fastened to the vehicle.
Prepare for Vehicle Mounting
The Thor VM3 should be secured to an area in the vehicle where it:
• Does not obstruct the driver's vision or safe vehicle operation.
• Will be protected from rain or inclement weather.
• Will be protected from extremely high concentrations of dust or wind-blown debris.
• Can be easily accessed by a user seated in the driver's seat while the vehicle is not in
operation.
Quick Start
The following list outlines, in a general way, the process to follow when mounting the
Thor VM3 in a vehicle. Refer to the following sections in this document for more details.
1. Install RAM Mount or Install U Bracket Mount to the vehicle.
2. Place Thor VM3 in the Dock.
3. Secure accessories such as an optional external keyboard or a scanner holder to
either an integrated or remote mounting bracket.
4. Adjust the Thor VM3 to the best viewing angle.
5. Install Remote Antenna or Install External Antenna if necessary.
6. Connect Cables for any peripherals.
7. Connect vehicle power:
• 12-48 VDC Vehicles (10-60 VDC Direct Connection)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid).
• Thor VX8 / Thor VX9 Adapter Cable
• VX6 / VX7 Adapter Cable
8. Secure all cables in Strain Relief Cable Clamps.
The Thor VM3 is ready for use.

Honeywell Thor VM3 Specifications

General

Stepping	D0
Tjunction	-40 °C
FSB Parity	No
Processor code	SR1X8
Processor cache	1 MB
Processor cores	2
Processor model	E3826
System bus rate	- GT/s
Processor family	Intel Atom®
Processor codename	Bay Trail
Processor frequency	1.46 GHz
Processor cache type	L2
Processor manufacturer	Intel
Processor package size	25 x 27 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor operating modes	32-bit, 64-bit
Graphics & IMC lithography	22 nm
PCI Express configurations	1x1, 1x4, 2x1
Thermal Design Power (TDP)	7 W
Internal memory	4 GB
Internal memory type	DDR3-SDRAM
Storage media	Flash
Compatible memory cards	-
Internal storage capacity	64 GB
Display diagonal	12.1 \
Display brightness	900 cd/m²
Display resolution	1024 x 768 pixels
Graphics card	HD Graphics
Rear camera resolution (numeric)	- MP
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
HDMI ports quantity	0
USB 2.0 ports quantity	1
I/O ports	1x CAN-bus, RF
Processor ARK ID	78477
Processor socket	BGA 1170
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Platform	Windows
Bundled software	Data Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installed	Windows 7
AC adapter input voltage	90 - 240 V
Battery capacity	- mAh
Battery life (max)	0.5 h
Certification	EN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device type	Tablet PC
Form factor	Slate
Product color	Grey, Silver
Protection features	Shock resistant, Vibration proof, Water resistant
International Protection (IP) code	IP66
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	62 mm
Width	318 mm
Height	260 mm
Weight	3000 g