Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide 235
Advanced Profile Configuration
Connection
This tab shows the basic information used to create the profile.
Options include:
• Connect automatically when this network is in range - If the profile was created as an
auto connect profile, this box is checked. If created as a manual profile, this box is
unchecked.
• Connect to a more preferred network if available
• Connect even if the network is not broadcasting its name (SSID) - If a network is not
broadcasting its SSID, check this box.
• Enable Atheros connection settings.
Note: Atheros connection settings must be enabled to use CCX. It is disabled by default.
Security
The options available on the security tab will depend on the security type and encryp-
tion type selected.
Review the appropriate section for configuring the WCU for network security:
• Open (No Security)
• WEP
• WPA2-Personal
• PEAP-TLS
• PEAP-MSCHAP