Honeywell Thor VM3 User Manual

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide 215
Automatic Firmware Update Utility
The automatic firmware update utility provides an automated process to update the
firmware on the Thor VM3. Firmware that can be updated includes BIOS, EC (Embed-
ded Controller) and Screen MCU (Micro Controller Unit). Firmware updates are distrib-
uted as cabinet (.cab) files. The .cab file contains the necessary firmware files (BIOS, EC
and Screen MCU) and a utility to install firmware files. The firmware update utility is
installed as part of the factory software load. This utility can be used to install newer
firmware or to revert to older firmware.
Use the Software tab of the About control panel to determine the currently installed
firmware versions.
It may be necessary to update firmware before installing an updated operating system.
Firmware Distribution Files
The following software files must be copied to the \System\FWUpdate folder in the
order listed. The files can be copied to the folder manually or remotely. Contact
Technical Assistance for upgrade files.
FWxxyyzz.cab - This file contains the firmware update files and a utility to verify version
compatibility and install the firmware files. The file name is structured such that xx
identifies the last digits of the BIOS firmware version, yy identifies the Embedded Con-
troller firmware version and zz identifies the screen MCU version.
UpdateFW.tag - The file that triggers the update utility to begin. Be sure to copy this file
only after the .cab file has been copied. As soon as the Thor VM3 detects the presence of
this file, the unit reboots in five seconds.
Update Process
1. Copy the files listed above to the \System\FWUpdate folder. Copy the.cab file first
then the .tag file.
b. The Thor VM3 automatically reboots and starts the update process after
detecting the updatefw.tag file. No user intervention is required to reboot the
Thor VM3 or run the update utility after the reboot. The update utility operates in
a DOS screen.
c. If the update is not successful, the update is tried three more times.
d. If the update fails, the \System\FWUpdate folder is cleaned up leaving
flashapp.exe, a flashlog.txt and a retry.tag file.
e. Review the flashlog.txt file. The log file lists what firmware (if any) has been
installed. If an error has occurred during the update process, it is detailed in the
flashlog.txt file.
Be sure to copy the updatefw.tag file to the \System\FWUpdate folder last.
The Thor VM3 begins the reboot process after detecting this file.

Honeywell Thor VM3 Specifications

General

Stepping	D0
Tjunction	-40 °C
FSB Parity	No
Processor code	SR1X8
Processor cache	1 MB
Processor cores	2
Processor model	E3826
System bus rate	- GT/s
Processor family	Intel Atom®
Processor codename	Bay Trail
Processor frequency	1.46 GHz
Processor cache type	L2
Processor manufacturer	Intel
Processor package size	25 x 27 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor operating modes	32-bit, 64-bit
Graphics & IMC lithography	22 nm
PCI Express configurations	1x1, 1x4, 2x1
Thermal Design Power (TDP)	7 W
Internal memory	4 GB
Internal memory type	DDR3-SDRAM
Storage media	Flash
Compatible memory cards	-
Internal storage capacity	64 GB
Display diagonal	12.1 \
Display brightness	900 cd/m²
Display resolution	1024 x 768 pixels
Graphics card	HD Graphics
Rear camera resolution (numeric)	- MP
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
HDMI ports quantity	0
USB 2.0 ports quantity	1
I/O ports	1x CAN-bus, RF
Processor ARK ID	78477
Processor socket	BGA 1170
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Platform	Windows
Bundled software	Data Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installed	Windows 7
AC adapter input voltage	90 - 240 V
Battery capacity	- mAh
Battery life (max)	0.5 h
Certification	EN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device type	Tablet PC
Form factor	Slate
Product color	Grey, Silver
Protection features	Shock resistant, Vibration proof, Water resistant
International Protection (IP) code	IP66
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	62 mm
Width	318 mm
Height	260 mm
Weight	3000 g