290 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
External 60-Key Keyboard
The key map table that follows lists the commands used when using the Thor VM3 with
the 60-key PS/2 Keyboard.
The 60-key keyboard does not have a NumLock indicator or key. NumLock can be tog-
gled On or Off using the 2nd SHIFT F10 keypress sequence. The default for NumLock is
On. Changes made to the NumLock status persist across a Windows restart.
When running RFTerm, please refer to the RFTerm Reference Guide for equivalent keys
and keypress sequences.
60 Key KeyMap 101-Key Equivalencies
• The following keymap is used on a Thor VM3 that is NOT running RFTerm.
• When using a sequence of keys that includes the 2nd key, press the 2nd key first then
the rest of the key sequence.
• When the Thor VM3 boots, the default condition of Caps (or CapsLock) is Off. The
Caps (or CapsLock) condition can be toggled with a 2nd + F1 key sequence. The
CAPS LED is illuminated when CapsLock is On. The keymaps below assume Caps is
Off.
• The Thor VM3 keyboard has several control keys. The following control keys are not
used:
• The 2nd function of the F3 key is not used as Windows Power Management
controls all power management modes on the Thor VM3.
• The 2nd functions of the F4 and F5 keys are not used as the display brightness is
adjusted via the buttons on the front of the Thor VM3.
• The 2nd functions of the F6 and F7 keys are not used as the Thor VM3 has TFT
LCD screen with no provision for contrast adjustments.
• The 2nd functions of the F8 and F9 keys are not used as the sound volume on the
Thor VM3 is controlled with a Microsoft Windows Control Panel.
• The 2nd function of the F10 key is not used as the display backlight timer also
controls the keyboard backlight.
To get this Key /
Function
Press These Keys in this Order
Power On/Off Power
2nd 2nd