Honeywell Thor VM3 User Manual

198 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
• Thor VM3 is already mounted to a dock and external power is applied to the dock
• Thor VM3 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM3 continues to run and follows the AC/DC power scheme with timers reset
at the time power was connected.
Ignition Control Mode
In Ignition mode, the Thor VM3 is turned On when the ignition switch is activated with
no user interaction required. The ignition input wire must be connected.
Note: When the UPS battery has been depleted or disconnected (the Thor VM3 is first powered
out of the box, the front panel has been replaced, etc.) power the Thor VM3 manually by
pressing the power button. After the initial power up, the Thor VM3 powers on
automatically when the Ignition Control Mode is enabled and the ignition is turned on.
Note: When ignition control is used to power the Thor VM3 on automatically the Wakeup Timer
must be enabled.
Thor VM3 is Off and Vehicle Ignition is Off
Conditions
The Thor VM3 is Off and vehicle ignition is Off.
Result
The Thor VM3 remains Off regardless of external power. UPS charging is disabled.
Conditions
The Thor VM3 has external power but vehicle ignition is Off. The Power button is
pressed.
Result
The Thor VM3 boots. Once booted the Thor VM3 follows the Ignition Control/Ignition
Off power scheme with timers reset after the boot completes.
Thor VM3 is Off and Vehicle Ignition is Switched to On
Conditions
The Thor VM3 is Off and vehicle ignition changes from Off to On.
Result
The Thor VM3 boots. Once booted the Thor VM3 follows the Ignition Control/Ignition
On power scheme with timers reset after the boot completes.
Thor VM3 is On and Vehicle Ignition is Switched to On
Conditions
The Thor VM3 is On and vehicle ignition changes from Off (or not present) to On.

Honeywell Thor VM3 Specifications

General

Stepping	D0
Tjunction	-40 °C
FSB Parity	No
Processor code	SR1X8
Processor cache	1 MB
Processor cores	2
Processor model	E3826
System bus rate	- GT/s
Processor family	Intel Atom®
Processor codename	Bay Trail
Processor frequency	1.46 GHz
Processor cache type	L2
Processor manufacturer	Intel
Processor package size	25 x 27 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor operating modes	32-bit, 64-bit
Graphics & IMC lithography	22 nm
PCI Express configurations	1x1, 1x4, 2x1
Thermal Design Power (TDP)	7 W
Internal memory	4 GB
Internal memory type	DDR3-SDRAM
Storage media	Flash
Compatible memory cards	-
Internal storage capacity	64 GB
Display diagonal	12.1 \
Display brightness	900 cd/m²
Display resolution	1024 x 768 pixels
Graphics card	HD Graphics
Rear camera resolution (numeric)	- MP
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
HDMI ports quantity	0
USB 2.0 ports quantity	1
I/O ports	1x CAN-bus, RF
Processor ARK ID	78477
Processor socket	BGA 1170
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Platform	Windows
Bundled software	Data Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installed	Windows 7
AC adapter input voltage	90 - 240 V
Battery capacity	- mAh
Battery life (max)	0.5 h
Certification	EN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device type	Tablet PC
Form factor	Slate
Product color	Grey, Silver
Protection features	Shock resistant, Vibration proof, Water resistant
International Protection (IP) code	IP66
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	62 mm
Width	318 mm
Height	260 mm
Weight	3000 g