Monitoring and Operating the Controller
4 Monitoring and Operating the Controller
4.1 Overview
Introduction
This section gives you all the information necessary to help you monitor and operate your
controller including an Operator Interface overview, how to lockout changes to the
controller, entering a security code, and monitoring the displays.
What's in this section?
The following topics are covered in this section.
TOPIC See Page
4.1 Overview 96
4.2 Operator Interface 97
4.3 Entering A Security Code 97
4.4 Lockout Feature 98
4.5 Monitoring The Controller 100
4.6 Start Up Procedure for Operation 103
4.7 Control Modes 105
4.8 Setpoints 106
4.9 Timer 107
4.10 Accutune 109
4.11 Fuzzy Overshoot Suppression 116
4.12 Using Two Sets Of Tuning Constants 116
4.13 Alarm Setpoints 118
4.14 Three Position Step Control Algorithm 120
4.15 Setting A Failsafe Output Value For Restart After A Power Loss 121
4.16 Setting Failsafe Mode 122
4.17 Setpoint Rate/Ramp/Program Overview 122
4.18 Setpoint Rate 123
4.19 Setpoint Ramp 123
4.20 Setpoint Ramp/Soak Programming 125
96 UDC3200 Universal Digital Controller Product Manual 12/04
To Next Page
Loading...
