Output Calibration
6 Output Calibration
6.1 Overview
Introduction
This section describes the field calibration procedures for the following types of outputs:
•
• Auxiliary Output
•
The following topics are covered in this section.
Current Output
Position Proportional Output and Three Position Step Output
What's in this section?
TOPIC See Page
6.1 Overview 143
6.2 Current Output Calibration
6.3 Auxiliary Output Calibration
6.4 Position Proportional and Three Position Step Output Calibration 148
6.5 Restore Output Factory Calibration
144
146
151
WARNING—SHOCK HAZARD
OUTPUT CALIBRATION MAY REQUIRE ACCESS TO HAZARDOUS LIVE CIRCUITS, AND
SHOULD ONLY BE PERFORMED BY QUALIFIED SERVICE PERSONNEL. MORE THAN
ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT BEFORE CALIBRATION.
12/04 UDC3200 Universal Digital Controller Product Manual 143
To Next Page
Loading...
