Configuration
3 Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke
sequences to select and establish (configure) pertinent control data best suited for your
application.
To assist you in the configuration process, there are prompts that appear in the upper and
lower displays. These prompts let you know what group of configuration data (Set Up
prompts) you are working with and also, the specific parameters (Function prompts)
associated with each group.
Table 3-1 shows an overview of the prompt hierarchy as it appears in the controller.
What’s in this section?
The following topics are covered in this section.
Table 3-1 Configuration Topics
TOPIC See Page
3.1 Overview 36
3.2 Configuration Prompt Hierarchy 37
3.3 Configuration Procedure 39
3.4 Tuning Set Up Group 40
3.5 SP Ramp Set Up Group 44
3.6 Accutune Set Up Group 48
3.7 Algorithm Set Up Group 50
3.8 Output Set Up Group 60
3.9 Input 1 Set Up Group 64
3.10 Input 2 Set Up Group 68
3.11 Control Set Up Group 71
3.12 Options Set Up Group 78
3.13 Communications Set Up Group 84
3.14 Alarms Set Up Group 87
3.15 Display Set Up Group 92
3.16 Configuration Record Sheet 94
36 UDC3200 Universal Digital Controller Product Manual 12/04
To Next Page
Loading...
