EasyManuals Logo

HP 5500 EI series User Manual

HP 5500 EI series
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
89
Two routers are required to complete a GR process. The following are router roles in a GR process.
• GR restarter—Graceful restarting router. It must have GR capability.
• GR helper—A neighbor of the GR restarter. It helps the GR restarter to complete the GR process.
OSPF GR has the following types:
• IETF GR—Uses Opaque LSAs to implement GR.
• Non-IETF GR—Uses link local signaling (LLS) to advertise GR capability and uses out of band
synchronization to synchronize the LSDB.
A device can act as a GR restarter and GR helper at the same time.
Configuring OSPF GR restarter
You can configure the IETF or non IETF OSPF GR restarter.
Configuring the IETF OSPF GR restarter
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable OSPF and enter its
view.
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
N/A
3. Enable opaque LSA reception
and advertisement capability.
opaque-capability enable
By default, opaque LSA reception
and advertisement capability is
enabled.
4. Enable the IETF GR.
graceful-restart ietf [ global |
planned-only ] *
By default, the IETF GR capability is
disabled.
5. (Optional.) Configure GR
interval.
graceful-restart interval
interval-value
The default setting is 120 seconds.
Configuring the non-IETF OSPF GR restarter
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable OSPF and enter its
view.
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
N/A
3. Enable the link-local signaling
capability.
enable link-local-signaling
By default, the link-local signaling
capability is disabled.
4. Enable the out-of-band
re-synchronization capability.
enable
out-of-band-resynchronization
By default, the out-of-band
re-synchronization capability is
disabled.
5. Enable non-IETF GR.
graceful-restart [ nonstandard ]
[ global | planned-only ] *
By default, non-IETF GR capability
is disabled.
6. (Optional.) Configure GR
interval.
graceful-restart interval
interval-value
The default setting is 120 seconds.

Table of Contents

Other manuals for HP 5500 EI series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5500 EI series and is the answer not in the manual?

HP 5500 EI series Specifications

General IconGeneral
BrandHP
Model5500 EI series
CategorySwitch
LanguageEnglish

Related product manuals