EasyManuals Logo

HP 5500 EI series User Manual

HP 5500 EI series
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
93
Ste
p
Command
Remarks
6. Enter OSPF view.
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
N/A
7. Enable OSPF FRR to calculate
a backup next hop by using
the LFA algorithm.
fast-reroute lfa [ abr-only ]
By default, OSPF FRR is not configured.
If abr-only is specified, the route to the
ABR is selected as the backup path.
Configuring OSPF FRR to specify a backup next hop using a
routing policy
Before you configure this task, use the apply fast-reroute backup-interface command to specify a backup
next hop in the routing policy to be referenced. For more information about the apply fast-reroute
backup-interface command and routing policy configuration, see "Configuring routing policies."
To configure OSPF FRR to specify a backup next hop using a routing policy:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure the source address
of echo packets.
bfd echo-source-ip ip-address
By default, the source address of
echo packets is not configured.
3. Enter OSPF view.
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
N/A
4. Enable OSPF FRR to specify a
backup next hop by using a
routing policy.
fast-reroute route-policy
route-policy-name
By default, OSPF FRR is not
configured.
Displaying and maintaining OSPF
Execute display commands in any view and reset commands in user view.
Task Command
Display OSPF process information
(MSR2000/MSR3000).
display ospf [ process-id ] [ verbose ]
display ospf area
Display OSPF process information
(MSR4000).
display ospf [ process-id ] [ verbose ] [ standby slot slot-number ]
Display OSPF GR information. display ospf [ process-id ] graceful-restart [ verbose ]
Display OSPF FRR backup next hop
information.
display ospf [ process-id ] [ area area-id ] fast-reroute candidate-nexthop
Display OSPF LSDB information
(MSR2000/MSR3000).
display ospf [ process-id ] lsdb [ area area-id | brief | [ { ase | router |
network | summary | asbr | nssa | opaque-link | opaque-area |
opaque-as } [ link-state-id ] ] [ originate-router advertising-router-id |
self-originate ] ]

Table of Contents

Other manuals for HP 5500 EI series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5500 EI series and is the answer not in the manual?

HP 5500 EI series Specifications

General IconGeneral
BrandHP
Model5500 EI series
CategorySwitch
LanguageEnglish

Related product manuals