HP 5500 EI series User Manual

399
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure a community
list.
• Configure a basic community list:
ip community-list { basic-comm-list-num | basic
basic-comm-list-name } { deny | permit }
[ community-number&<1-32> | aa:nn&<1-32> ]
[ internet | no-advertise | no-export |
no-export-subconfed ] *
• Configure an advanced community list:
ip community-list { adv-comm-list-num | advanced
adv-comm-list-name } { deny | permit }
regular-expression
Use either method.
By default, no
community list is
configured.
Configuring an extended community list
You can configure multiple items for an extended community list that is identified by a number. The
relationship between items is logic OR. A route that matches one item matches the extended community
list.
To configure an extended community list:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure an extended
community list.
ip extcommunity-list ext-comm-list-number { deny |
permit } { rt route-target }&<1-32>
By default, no extended
community list is
configured.
Configuring a MAC list
If all the items are set to deny mode, no routes can pass the MAC list. To allow other routing information
to pass, you must configure the permit 0.0.0.0 0 less-equal 32 item following multiple deny items.
To configure a MAC list:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Configure a MAC
list.
mac-list mac-list-name [ index index-number ] { deny |
permit } mac-address [ mask-length ]
By default, no MAC list is
configured.
Configuring a routing policy
Configuration prerequisites
Configure filters and routing protocols, and determine the routing policy name, node numbers, match
criteria, and the attributes to be modified.

HP 5500 EI series Specifications

General

Brand	HP
Model	5500 EI series
Category	Switch
Language	English