HP 5500 EI series User Manual

9
Ste
p
Command Remarks
2. Configure BFD
control mode for a
static route.
• Method 1:
ip route-static dest-address { mask | mask-length }
{ next-hop-address bfd control-packet bfd-source
ip-address | vpn-instance d-vpn-instance-name
next-hop-address bfd control-packet bfd-source
ip-address } [ preference preference-value ] [ tag
tag-value ] [ description description-text ]
• Method 2:
ip route-static vpn-instance s-vpn-instance-name
dest-address { mask | mask-length }
{ next-hop-address bfd control-packet bfd-source
ip-address | vpn-instance d-vpn-instance-name
next-hop-address bfd control-packet bfd-source
ip-address } [ preference preference-value ] [ tag
tag-value ] [ description description-text ]
Use either method.
By default, BFD control
mode for a static route is
not configured.
Single-hop echo mode
With BFD echo mode enabled for a static route, the output interface sends BFD echo packets to the
destination device, which loops the packets back to test the link reachability.
IMPORTANT:
Do not use BFD for a static route with the output interface in spoofing state.
To configure BFD echo mode for a static route:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the source
address of echo
packets.
bfd echo-source-ip ip-address
By default, the source
address of echo packets is
not configured.
For more information about
this command, see High
Availability Command
Reference.
3. Configure BFD echo
mode for a static
route.
• Method 1:
ip route-static dest-address { mask |
mask-length } interface-type interface-number
next-hop-address bfd echo-packet [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
• Method 2:
ip route-static vpn-instance
s-vpn-instance-name dest-address { mask |
mask-length } interface-type interface-number
next-hop-address bfd echo-packet [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
Use either method.
By default, BFD echo mode
for a static route is not
configured.

HP 5500 EI series Specifications

General

Brand	HP
Model	5500 EI series
Category	Switch
Language	English