To Next Page

To Previous Page

224

Ste

Command

Remarks

2. Enter BGP view or BGP-VPN

instance view.

• Enter BGP view:

bgp as-number

• Enter BGP-VPN instance view:

a. bgp as-number

b. ip vpn-instance

vpn-instance-name

N/A

3. Configure the keepalive

interval and hold time.

• Configure the global keepalive

interval and hold time:

timer keepalive keepalive hold

holdtime

• Configure the keepalive

interval and hold time for a

peer or peer group:

peer { group-name |

ip-address } timer keepalive

keepalive hold holdtime

Use either method.

By default, the keepalive interval is

60 seconds, and hold time is 180

seconds.

The timer command takes effect for

new BGP sessions and does not

affect existing sessions.

If you modify the timers with the

peer timer command, BGP

immediately closes the existing

BGP session and creates a new

session to the peer by using the

new settings.

To configure the keepalive interval and hold time (IPv6):

Ste