266
[RouterC-bgp-ipv4] peer 194.1.1.2 enable
[RouterC-bgp-ipv4] quit
[RouterC-bgp] quit
# Configure Router D.
<RouterD> system-view
[RouterD] bgp 200
[RouterD-bgp] router-id 4.4.4.4
[RouterD-bgp] peer 194.1.1.1 as-number 200
[RouterD-bgp] address-family ipv4 unicast
[RouterD-bgp-ipv4] peer 194.1.1.1 enable
[RouterD-bgp-ipv4] quit
[RouterD-bgp] quit
3. Configure Router C as the route reflector.
[RouterC] bgp 200
[RouterC-bgp] address-family ipv4 unicast
[RouterC-bgp-ipv4] peer 193.1.1.2 reflect-client
[RouterC-bgp-ipv4] peer 194.1.1.2 reflect-client
[RouterC-bgp-ipv4] quit
[RouterC-bgp] quit
Verifying the configuration
# Display the BGP routing table on Router B.
[RouterB] display bgp routing-table ipv4
Total number of routes: 1
BGP local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped, h - history,
s - suppressed, S - Stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
* >e 20.0.0.0 192.1.1.1 0 0 100i
# Display the BGP routing table on Router D.
[RouterD] display bgp routing-table ipv4
Total number of routes: 1
BGP local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - damped, h - history,
s - suppressed, S - Stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
i 20.0.0.0 193.1.1.2 0 100 0 100i
To Next Page
Loading...
