HP 9020 - Front Cover, including Keyboard Bezel

4-6 Assembly Access
To remove a side door, UNPLUG COMPUTER POWER CORD FROM AC OUTLET, and open
door. Then, with flat-blade screwdriver, pry bottom of door away from hinge pins (Figure 4-3).
Figure 4-3. Removing Side Door
Front Cover, including Keyboard Bezel
The front cover is removed to provide access to the keyboard, printer, mass storage devices, and
other assemblies. To remove the front cover, perform the following procedures:
1. UNPLUG COMPUTER POWER CORD FROM AC OUTLET.
2. Open both side doors as previously described.