To Next Page

To Previous Page

Web and MAC Authentication

Configuring Web Authentication

Syntax: aaa port-access web-based <port-list > [client-moves]

Configures whether the client can move between ports.

Default: Disabled

Syntax: aaa port-access web-based [dhcp-addr <ip-address/mask>]

Specifies the base address/mask for the temporary IP

pool used by DHCP. The base address can be any valid

ip address (not a multicast address). Valid mask range

value is <255.255.240.0 - 255.255.255.0>.

(Default: 192.168.0.0/255.255.255.0)

Syntax: aaa port-access web-based [dhcp-lease <5 - 25>]

Specifies the lease length, in seconds, of the temporary

IP address issued for Web Auth login purposes.

(Default: 10 seconds)

Syntax:

aaa port-access web-based <port-list >

[logoff-period] <60-9999999>]

Specifies the period, in seconds, that the switch

enforces for an implicit logoff. This parameter is

equivalent to the MAC age interval in a traditional

switch sense. If the switch does not see activity after a

logoff-period interval, the client is returned to its pre-

authentication state. (Default: 300 seconds)

Syntax: aaa port-access web-based <port-list > [max-requests <1-10>]

Specifies the number of authentication attempts that

must time-out before authentication fails.

(Default: 2)

3-23

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General