To Next Page

To Previous Page

Web and MAC Authentication

Configuring MAC Authentication on the Switch

Syntax: show port-access mac-based config [port-list]

Displays the currently configured MAC Authentication

settings for all switch ports or specified ports, including:

• MAC address format

• Support for RADIUS-assigned dynamic VLANs (Yes or

No)

• Controlled directions setting for transmitting Wake-on-

LAN traffic on egress ports

• Authorized and unauthorized VLAN IDs

If the authorized or unauthorized VLAN ID value is 0, the

default VLAN ID is used unless overridden by a RADIUS-

assigned value.

ProCurve(config)# show port-access mac-based config

Port Access MAC-Based Configuration

MAC Address Format : no-delimiter

Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No

Client Client Logoff Re-Auth Unauth Auth Cntrl

Port Enabled Limit Moves Period Period VLAN ID VLAN ID Dir

----- -------- ------ ------ ------ ------- -------- ------- ----

1 No 1 No 300 0 0 0 both

2 Yes 1 No 300 0 0 0 in

...

Figure 3-15. Example of show port-access mac-based config Command Output

3-39

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General