To Next Page

To Previous Page

Web and MAC Authentication

Configuring MAC Authentication on the Switch

Syntax: show port-access mac-based clients <port-list> detailed

Displays detailed information on the status of MAC-

authenticated client sessions on specified ports.

ProCurve(config)# show port-access mac-based clients 1 detailed

Port Access MAC-Based Client Status Detailed

Client Base Details :

Port : 1

Session Status : authenticated Session Time(sec) : 6

Username : client1 MAC Address : 0010b5-891a9e

IP : n/a

Access Policy Details :

COS Map : 12345678 In Limit % : 98

Untagged VLAN : 4006 Out Limit % : 100

Tagged VLANs : 1, 3, 5, 6, 334, 4001

RADIUS-ACL List :

deny in udp from any to 10.2.8.233 CNT

Hit Count: 0

permit in udp from any to 10.2.8.233 CNT

Hit Count: 0

deny in tcp from any to 10.2.8.233 CNT

Hit Count: 0

permit in tcp from any to 10.2.8.233 CNT

Hit Count: 0

permit in tcp from any to 0.0.0.0/0 CNT

Hit Count: 0

Figure 3-14. Example of show port-access mac-based clients detail Command Output

3-38

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General