Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 222)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 226)
■ interface loopback < 0 to 7 > ip ospf all area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 222)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 226)
■ interface vlan VLAN-ID ip ospf area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 222)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 226)
■ interface vlan VLAN-ID ip ospf IP-ADDR area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 222)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 226)
■ interface vlan VLAN-ID ip ospf all area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 222)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 226)
area-id
■ interface loopback < 0 to 7 > ip ospf IP-ADDR area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
■ interface loopback < 0 to 7 > ip ospf all area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
■ interface vlan VLAN-ID ip ospf area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
■ interface vlan VLAN-ID ip ospf IP-ADDR area OSPF-AREA-ID
222© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
To Next Page
Loading...
