HP ProCurve 5400zl User Manual

Set limits for all inbound trafc.
Next Available Options:
■ percent < 0 to 100 > -- Specify limit as percent of inbound or outbound traffic.(p. 258)
■ kbps < 0 to 10000000 > -- Specify limit of allowed inbound or outbound traffic in
kilobits-per-second on the specified port(s). Actual limits are in steps of 100Kbps to 100Mbps
(granularity is 1% of the lowest related media speed). (p. 246)
■ [no] interface [ETHERNET] PORT-LIST rate-limit bcast in
Set limits for inbound broadcast trac.
Next Available Option:
■ percent < 0 to 100 > -- (p. 258)
■ [no] interface [ETHERNET] PORT-LIST rate-limit mcast in
Set limits for inbound multicast trac
Next Available Option:
■ percent < 0 to 100 > -- (p. 258)
■ [no] interface [ETHERNET] PORT-LIST ipv6 access-group ACCESS-GROUP in
Match inbound packets.
■ [no] interface [ETHERNET] PORT-LIST service-policy SERVICE-POLICY in
Apply policy on inbound packets.
■ [no] interface vlan VLAN-ID service-policy SERVICE-POLICY in
Apply policy on inbound packets.
integer-range
■ interface [ETHERNET] PORT-LIST qos dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ interface vlan VLAN-ID qos dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
■ interface svlan VLAN-ID qos dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
interface
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > track interface
239© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English