HP ProCurve 5400zl

monitor
OVERVIEW
Category:
configPrimary context:
show monitor (page 570)Related Commands
Usage: [no] monitor mac MAC-ADDR <src | dst | both> mirror <1-4 | NAME-STR>
Description: Set up trafc monitoring for a given MAC address. Network
trafc with this MAC address as the source or destination is
copied to the mirror port.
Parameters: o MAC-ADDR - MAC address to be monitored
o <src | dst | both> - Type of trafc to monitor:
src - Monitor trafc with MAC-ADDR as the source.
dst - Monitor trafc with MAC-ADDR as the destination.
both - Monitor trafc with MAC-ADDR as the source or
destination.
o <1-4> - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destionation number.
COMMAND STRUCTURE
■ [no] monitor mac -- MAC address. (MAC-ADDR) (p. 385)
■ monitor_mac_direction < src | dst | both > -- (p. 386)
■ mirror -- Mirror destination. (p. 385)
■ mirror_session_id < 1 to 4 > -- Mirror destination number. (p. 386)
■ mirror_session_name -- Mirror destination name. (p. 386)
COMMAND DETAILS
monitor_mac_direction (p. 386)mirror_session_id (p. 386)mac (p. 385)
mirror_session_name (p. 386)mirror (p. 385)
mac
■ [no] monitor mac MAC-ADDR
Congures the MAC address as selection criteria for mirroring trafc on
any port or learned VLAN on the switch.
Next Available Option:
■ monitor_mac_direction < src | dst | both > -- (p. 386)
mirror
■ [no] monitor mac MAC-ADDR < src | dst | both > mirror
Mirror destination. Assigns the inbound and/or outbound trafc ltered by the
specied
MAC address to a previously congured mirroring session. The session is identied
by a
385© 2009 Hewlett-Packard Development Company, L.P.