HP ProCurve 5400zl User Manual

■ max-requests < 1 to 10 > -- Set maximum number of times the switch retransmits authentication
requests (default 3). (NUMBER) (p. 39)
■ reauth-period < 0 to 9999999 > -- Set the re-authentication timeout in seconds; set to '0' to
disable re-authentication (default 0). (NUMBER) (p. 47)
■ auth-vid -- Configures VLAN where to move port after successful authentication (not configured
by default).(p. 30)
■ unauth-vid -- Configures VLAN where to keep port while there is an unauthorized client
connected (not configured by default).(p. 53)
■ reauthenticate -- Force re-authentication to happen.(p. 47)
web-redirect-url
■ aaa port-access web-based [ETHERNET] PORT-LIST redirect-url WEB-REDIRECT-URL
Set the URL that the user should be redirected to after successful login (default
none), Specify url up to 103 characters length.
web-unauthvid
■ aaa port-access web-based [ETHERNET] PORT-LIST unauth-vid VLAN-ID
Congures VLAN where to keep port while there is an unauthorized client connected
(not congured by default).
58© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English