HP ProCurve 5400zl User Manual

Parameters: o 1-4 - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the trafc to be monitored.
Next Available Option:
■ all < In | Out | Both > -- Monitor all traffic.(p. 665)
monitor_mirror_session_id
■ [no] svlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
name
■ svlan VLAN-ID name NAME
Usage: name ASCII-STR
Description: Set the VLAN's name.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
priority
■ svlan VLAN-ID qos priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
protocol
■ svlan VLAN-ID protocol
Set a predened protocol for the current VLAN.
Next Available Options:
■ protocols < IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN. (p. 671)
■ protocol-group -- Enter a list of protocols for the current VLAN delimited by commas.
(ASCII-STR) (p. 671)
670© 2009 Hewlett-Packard Development Company, L.P.
svlanCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English