protocol-group
â– [no] svlan VLAN-ID protocol PROTOCOL-GROUP
Enter a list of protocols for the current VLAN delimited by commas.
protocols
â– [no] svlan VLAN-ID protocol < IPX | IPv4 | IPv6 | ... >
Set a predeîš¿ned protocol for the current VLAN.
Supported Values:
â– IPX -- IPX Protocol Group
â– IPv4 -- IP version 4 Protocol Group
â– IPv6 -- IP version 6 Protocol Group
â– ARP -- Address Resolution Protocol Group
â– Appletalk -- Appletalk Protocol Group
â– SNA -- System Network Architecture Protocol Group
â– NetBEUI -- Network BIOS Enhanced User Interface Protocol Group
qos
â– [no] svlan VLAN-ID qos
Usage: [no] qos [dscp <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111> |
priority <0-7>]
Description: Set VLAN-based priority. The 'dscp' or 'priority' must
be speciîš¿ed if 'no' is not used. Using 'no' conîš¿gures
the switch not to apply a VLAN priority override to this
VLAN's packets.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
â– dscp -- Specify DSCP policy to use. (p. 666)
â– priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 670)
rapid-commit
â– [no] svlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
src-ip
â– svlan VLAN-ID connection-rate-filter unblock IP-ADDR/mask-LENGTH
Match packets from the speciîš¿ed subnet.
tagged
â– [no] svlan VLAN-ID tagged [ETHERNET] PORT-LIST
Usage: [no] tagged [ethernet] PORT-LIST
671© 2009 Hewlett-Packard Development Company, L.P.
svlanCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General