Description: Assign ports to current VLAN as tagged.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
unblock
â– svlan VLAN-ID connection-rate-filter unblock
Resets a host previously blocked by the connection rate îš¿lter
Next Available Options:
â– all -- Resets all previously blocked by the connection rate filter (p. 665)
â– host -- Match packets from the specified IP address. (IP-ADDR) (p. 667)
â– src-ip -- Match packets from the specified subnet. (IP-ADDR/mask-LENGTH) (p. 671)
untagged
â– [no] svlan VLAN-ID untagged [ETHERNET] PORT-LIST
Usage: [no] untagged [ethernet] PORT-LIST
Description: Assign ports to current VLAN as untagged.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
voice
â– [no] svlan VLAN-ID voice
Usage: [no] voice
Description: Labels this VLAN as a Voice VLAN, allowing you to separate,
prioritize, and authenticate voice trafîš¿c moving through
your network.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
well-defined
â– svlan VLAN-ID qos dscp < af11 | af12 | af13 | ... >
Usage: [no] qos dscp-map <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111>|
[priority <<0-7>|no-override>]
[name <str>]
Description: Deîš¿ne mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802.1p priority. The mapping is used
to assign priority for IPv4 packets if a QoS classiîš¿er uses
this DSCP policy as the method of trafîš¿c prioritization.
The mapping also provides the proîš¿le for inbound classiîš¿cation
and priority assignment based on an IPv4 packet's received
IP ToS byte ONLY IF the user has also conîš¿gured
'qos type-of-service diff-services'
672© 2009 Hewlett-Packard Development Company, L.P.
svlanCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General