HP Proliant DL580 - Slot Architecture and Buses

PCI-X Technology
Slot Architecture and Buses
Each of the six PCI-X expansion slots in the ProLiant DL580 Generation 2 server
operates at a maximum frequency of 100 MHz and is managed across three data
buses. The server facilitates load balancing by having no more than two slots per bus.
Use Figure 7-1 and Table 7-1 to identify the PCI-X expansion slots and buses.
Figure 7-1: PCI-X expansion slots and buses
Table 7-1: Expansion Slots and Buses
Item Slot
1 Slot 1 (non-hot-plug)
2 Slot 2 (non-hot-plug)
Shared PCI-X bus 10,
100 MHz
3 Slot 3 (hot-plug)
4 Slot 4 (hot-plug)
Shared PCI-X bus 6,
100 MHz
5 Slot 5 (hot-plug)
6 Slot 6 (hot-plug)
Shared PCI-X bus 2,
100 MHz
NOTE: All PCI-X slots are 64-bit, 100-MHz capable, 3.3-V keyed.
7-2 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: h-ch7 PCI-X Technology.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:38 AM