HP Proliant DL580 - PCI-X Hot Plug Utility for Windows NT

PCI-X Technology
PCI-X Hot Plug Utility for Windows NT
The PCI-X Hot Plug Utility for Windows NT (located on the ProLiant Essentials
Foundation Pack) enables you to view the status of the PCI-X Hot Plug slots and to
initiate actions such as replacing a failed expansion board.
The Windows NT PCI-X Hot Plug Utility screen is divided into three sections:
•
•
•
Top
This area enables you to connect to a remote computer by typing the server name
in the combo box, selecting a server from the combo box, or clicking Browse to
bring up a selection dialog. Clicking Refresh refreshes the PCI-X Hot Plug
information for the current server.
Middle
The list control displays information about the PCI-X Hot Plug slots on the
current server: LEDs, location, expansion board name (if any), and the status of
the slot and/or expansion board. The columns can be sorted and resized, and
some can be hidden. These commands are accessible by right-clicking the mouse
on a column header.
Bottom
The filter drop-down list box can be used to define the slots shown: clicking
Power toggles the power to the currently selected slot, Help brings up the
standard Help Finder dialog, and Exit exits the utility.
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide 7-23
HP CONFIDENTIAL
Writer: Karen Hale File Name: h-ch7 PCI-X Technology.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:38 AM