HP Proliant DL580 - Server Cabling; Cabling Guidelines and Procedures

Installing Hardware Options
2. With even pressure, push the front access panel down and slide it toward the
front of the server into the fitted slots.
Figure 5-12: Replacing the front access panel
3. Place the rear access panel on top of the server. Be sure to line up the guide
marks on the rear access panel with the corresponding server guide marks.
Figure 5-13: Lining up the guide marks
4. Slide the rear access panel toward the back of the server until it stops.
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide 5-17
HP CONFIDENTIAL
Writer: Karen Hale File Name: f-ch5 Installing Hardware Options.doc
Codename: Dwarf Part Number: 230835-003 Last Saved On: 6/26/03 9:31 AM