Server Configuration and Utilities
Integrated Management Log
The Integrated Management Log (IML) records hundreds of events and stores them
in an easy-to-view form. The IML time-stamps each event with one-minute
granularity.
Identifying Severity Levels
Events listed in the IML are categorized as one of four event severity levels:
•
•
•
•
•
•
•
Status—indicates that the message is informational only
Repaired—indicates that corrective action was taken
Caution—indicates a non-fatal error condition occurred
Critical—indicates a component failure has occurred
IML requires HP operating-system-dependent drivers. Refer to the ProLiant
Essentials Foundation Pack for instructions on installing the appropriate drivers.
Viewing the Log
You can view recorded events in the IML in several ways, including the following:
From within the Insight Manager 7
From within the Survey Utility
From within operating-system-specific IML viewers
— For NetWare, HP IML Viewer
— For Windows NT, Event Viewer or HP IML Viewer
— For Linux, HP IML Viewer Application
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide 10-19
HP CONFIDENTIAL
Writer: Karen Hale File Name: k-ch10 Server Configuration and Utilities.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:43 AM
To Next Page
Loading...
