HP Proliant DL580 - RBSU Default Settings

Server Configuration and Utilities
Table 10-1: RBSU Default Settings
Menu/Option Default Setting
System Options
OS Selection
Windows 2000
Windows Server 2003
Embedded COM Port A
COM 1; IRQ 4
Embedded COM Port B
COM 2; IRQ 3
Integrated Diskette Controller
Enabled
NUMLOCK Power-On State
Off
NIC PXE Support
Enabled
Diskette Read/Write Control
Read and write
Diskette Boot Control
Enabled
IPL Device Boot Order
CD-ROM
IPL: 1
Diskette Drive (A:)
IPL: 2
Hard Drive (C:)
IPL: 3
PXE
IPL: 4
Server Passwords
Set Administrator Password
None
Set Power-On Password
None
Network Server Mode
Disabled
QuickLock
Disabled
Automatic Server Recovery
ASR Status
Enabled
ASR Timeout
10 minutes
Thermal Shutdown
Enabled
continued
10-8 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: k-ch10 Server Configuration and Utilities.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:43 AM