Installing Hardware Options
8. Install the processor/heatsink assembly into the available processor socket:
IMPORTANT: Mixing processor speeds and cache sizes is not supported.
a. Determine the correct processor orientation by observing the three guide pins
on the processor retaining bracket and the three corresponding guide holes on
the processor/heatsink assembly.
b. Insert the processor/heatsink assembly into the processor socket (1).
9. Close the processor locking lever (2).
IMPORTANT: If the processor locking lever is not closed, the processor retaining bracket
does not close properly.
NOTE: Observe the “locked” and “unlocked” icons on the processor locking lever to be
sure that you are performing the correct operation when closing the locking lever.
Figure 5-19: Installing the processor/heatsink assembly
5-24 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: f-ch5 Installing Hardware Options.doc
Codename: Dwarf Part Number: 230835-003 Last Saved On: 6/26/03 9:31 AM
To Next Page
Loading...
