HP Proliant DL580 - Attaching the Round-Hole Bracket to the Cable Management Arm

Installing the Server in a Rack
2. Attach the round-hole bracket by pulling the spring-activated fasteners on the
cable management arm out (1), and then inserting the bracket in between them
(2).
Figure 8-16: Attaching the round-hole bracket to the
cable management arm
3. Slide the bracket onto the rack (1).
8-20 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: i-ch8 Installing the Server in a Rack.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:41 AM