HP Proliant DL580 - Registering the Server; Routine Maintenance

Server Setup
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide 9-3
HP CONFIDENTIAL
Writer: Karen Hale File Name: j-ch9 Server Setup.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:42 AM
•
•
•
For more information about using RBSU or the ProLiant Essentials utility to
configure the server, refer to Chapter 10, “Server Configuration and Utilities” and the
ROM-Based Setup Utility User Guide.
For the most current information about operating system support on ProLiant DL580
Generation 2 servers, refer to the operating system support matrix on the product
page at
www.hp.com.
If you choose to create a backup of the hardware configuration, you can use the
Configuration Replication Utility. For more information, refer to the “ProLiant
Essentials Scripting Toolkit” section in Chapter 10, “Server Configuration and
Utilities.”
Registering the Server
You can register the server from the following website:
www.compaq.com/products/registration
Routine Maintenance
The HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide
provides specific information required for general maintenance and component
replacement, including:
Spare part numbers
Removal and replacement procedures
Diagnostic tools
The HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide can
be accessed through the Documentation CD or the product website at
www.hp.com.