Server Configuration and Utilities
ROM-Based Setup Utility
The RBSU is a configuration utility that is embedded in the server ROM. The RBSU
helps you configure certain server hardware settings and prepare the server for
operating system installation without using diskettes. The RBSU enables you to view
and establish server configuration settings during initial system startup, as well as
modify them after the server has been configured.
RBSU performs a wide range of configuration activities including:
•
•
•
•
•
•
•
•
•
•
•
Configuring system devices and installed options
Viewing system information
Selecting the operating system
Selecting the primary boot controller
Managing storage options
Configuring advanced memory protection (online spare memory, single-board
mirrored memory, and hot-plug mirrored memory)
In addition, RBSU includes other features, which are outlined in the “Using RBSU”
section in this chapter.
Navigating RBSU
To navigate RBSU, use the following keys:
To access RBSU, press the F9 key during power up.
To navigate the menu system, use the arrow keys.
To make selections, press the Enter key.
To exit RBSU, press the F10 key.
To return to the previous menu, press the Esc key.
10-2 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: k-ch10 Server Configuration and Utilities.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:43 AM
To Next Page
Loading...
