System LEDs and Switches
System Board Switches
Some server operations, including adding or removing a component or changing a
security feature, require that you reconfigure a system switch. If the system
configuration is incorrect, the server may not work properly and you may receive
error messages on the screen. Setting and verifying the system board switches is an
important part of the overall troubleshooting process.
The ProLiant DL580 Generation 2 server has three switch banks:
•
•
•
System maintenance switch (SW4)
System ID switch (SW7)
iLO/Spread Spectrum switch (SW8)
This section provides figures and tables to identify the locations, positions, functions,
and settings for each of these switches.
E-16 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: p-appe System LEDs and Switches3.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:49 AM
To Next Page
Loading...
