HP Proliant DL580 - Page 201

Server Configuration and Utilities
Automatic Server Recovery
The Automatic Server Recovery menu includes the following items:
•
•
•
•
•
•
•
Automatic Server Recovery enables you to enable or disable the Automatic
Server Recovery option.
Thermal Shutdown enables you to disable or enable the system automatic
shutdown feature caused by a thermal caution event. This option is enabled by
default. HP does not recommend disabling this feature.
Server Asset Tags
The Server Asset Tags menu enables you to access the Server Info Text. Server
Info Text enables you to identify the system with an Asset Tracking Number.
Advanced Options
The Advanced Options menu enables you to configure advanced options of the
system. The following selections are available in this menu:
MPS Table Mode enables you to change the APIC table setting. The APIC table
setting is automatically set by the OS Selection setting.
POST Speed Up enables you to enable or disable the complete memory test.
Wake On LAN enables you to enable or disable Wake On LAN Support.
Erase Non-volatile Memory enables you to reset the configuration settings to
their factory defaults.
Advanced Memory Protection enables you to choose one of the following
memory modes:
— Advanced ECC support sets the system to use the standard four-way
DIMM configuration.
— Online spare with ECC support tests the DIMM configuration and sets the
system to use the online spare memory feature. An error message is
displayed during POST if the DIMMs are not configured correctly.
10-6 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: k-ch10 Server Configuration and Utilities.doc
Codename: Wave Part Number: 230835-003 Last Saved On: 6/26/03 9:43 AM