Installing Hardware Options
• BBWCE
•
•
Memory boards and DIMMs
PCI-X expansion boards that are installed in slots 1 and 2
WARNING: To reduce the risk of personal injury or damage to the equipment,
HP recommends that only trained and qualified personnel install non-hot-plug
components. In particular, personnel should be trained to deal with products
capable of producing hazardous energy levels.
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Disconnect power from the server by unplugging all power cords from
either the electrical outlet or the server.
• Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
Hot-plug options include:
•
•
•
•
•
Hot-plug SCSI hard drives
Hot-plug fans
Redundant hot-plug power supplies
Memory board in the hot-plug mirrored memory mode or when Hot-Add
functionality guidelines are met
PCI-X Hot Plug expansion boards, slots 3 through 6
5-4 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: f-ch5 Installing Hardware Options.doc
Codename: Dwarf Part Number: 230835-003 Last Saved On: 6/26/03 9:31 AM
To Next Page
Loading...
