Software and configuration utilities 155
Enable/Disable PL2. If this
option is disabled, BIOS will
program the deafult values for
PL2 Power Limit and PL2 Time
Window.
PL2 Power Limit in Watts. The
value may vary from 0 to Fused
Value. If the value is 0, BIOS
programs 125% * TDP.
This item will be hidden when
“PL2 Limit” is disabled.
PL2 value in seconds. The value
may vary from 0 to 56. Indicates
the time window over which TDP
value should be maintained. If
the value is 0, the fused value
will be programmed.
This item will be hidden when
“PL2 Limit” is disabled.
ACPI Sx State Control
To access this screen from the Main screen, choose Socket Configuration > Advanced Power
Management Configuration > ACPI Sx State Control.
To Next Page
Loading...
