HPE Cloudline CL3100 Gen10

Software and configuration utilities 156
Server Mgmt screen
The Server Mgmt screen displays the information of BMC. To access this screen from the Main screen,
choose Server Mgmt.
Setup Item
Options
Help Text
Comments
BMC Self Test Status
Information only.
BMC Device ID
Information only.
BMC Device Revision
Information only.
BMC Firmware
Revision
Information only.
IPMI Version
Information only.
BMC Support
Enabled
Disabled
Enable/Disable interfaces to
communicate with BMC.
This Page option will be hidden
when this item is disabled.
Wait For BMC
Enabled
Disabled
Wait For BMC response for
specified time out. In PILOTII,
BMC starts at the same time
when BIOS starts during AC
power ON. It takes
approximately 30 seconds to
initialize Host to BMC interfaces.
FRB-2 Timer
Enabled
Disabled
Enable or Ddisable FRB-2 Timer
(POST timer).
FRB-2 Timer timeout
3 minutes
4 minutes
5 minutes
6 minutes
Enter value Between 3 to 6 min
for FRB-2 Timer Expiration
value.