HPE Cloudline CL3100 Gen10

Software and configuration utilities 157
Setup Item
Options
Help Text
Comments
FRB-2 Timer Policy
Do Nothing
Reset
Power Down
Power Cycle
Configure how the system
should respond if the FRB-2
Timer expires. Not available if
FRB-2 Timer is disabled.
OS Watchdog Timer
Enabled
Disabled
If enabled, starts a BIOS timer
which can only be shut off by
Management Software after the
OS loads. Helps determine that
the OS successfully loaded or
follows the OS Boot Watchdog
Timer policy.
OS Wtd Timer Timeout
5 minutes
10 minutes
15 minutes
20 minutes
Configure the length of the OS
Boot Watchdog Timer. Not
available if OS Boot Watchdog
Timer is disabled.
Can select options when set “OS
Watchdog Timer” to “Enabled”.
OS Wtd Timer Policy
Do Nothing
Reset
Power Down
Power Cycle
Configure how the system
should respond if the OS Boot
Watchdog Timer expires. Not
available if OS Boot Watchdog
Timer is disabled.
Can select options when set “OS
Watchdog Timer” to “Enabled”.
Serial Mux
Enabled
Disabled
Press <Enter> to enable or
disable Serial Mux configuration.
System Event Log
Press <Enter> to change the
SEL event Log configuration.
View FRU information
Press <Enter> to view FRU
information.
BMC Network
Configuration
Configure BMC network
parameters.
View System Event
Log
Press <Enter> to view the
System Event Log Records.