HPE Cloudline CL3100 Gen10 - Page 161

Software and configuration utilities 161
Setup Item
Options
Help Text
Comments
Configuration Address
Source
Unspecified
Static
DynamicBmcDhcp
Select to configure LAN channel
parameters statically or
dynamically (by BIOS or BMC).
An unspecified option does not
modify any BMC network
parameters during BIOS phase.
During BIOS phase, BIOS will
send IPMI command to change
BMC network IP source to this
item specified, after that, this
item’s value will revert back to
[Unspecified].
Current Configuration
Address source
Information only.
Station IP Address
Information only. Displays the
Station IP Address get from
BMC.
Subnet Mask
Information only. Displays the
Subnet Mask get from BMC.