HPE Cloudline CL3100 Gen10 - Page 163

Software and configuration utilities 163
Setup Item
Options
Help Text
Comments
Configuration Address
Source
Unspecified
Static
DynamicBmcDhcp
Select to configure LAN channel
parameters statically or
dynamically (by BIOS or BMC).
Unspecified option will not
modify any BMC network
parameters during BIOS phase.
Current Configuration
Address source
Information only.
Station IPV6 address
Information only.
Prefix Length
Information only.
IPV6 Router1 IP
Address
Information only.
IPV6 address status
Active
Information only.
IPV6 DHCP Algorithm
DHCPv6
Information only.
NOTE: Select “Configuration Address Source” to [DynamicBmcDhcp], it will list the same items as
select “Configuration Address Source” to [Unspecified], and will not include Configuration Address
Source item.
NOTE: If the user selects Static under “Configuration Address Source” is selected, the user must
manually configure the option.
View System Event Log
The View System Event Log screen displays the information of System Event Log .To access this screen
from the Main screen, choose Server Mgmt > View System Event Log.
Setup
Item
Help Text
Comments
No. of Log Entries in SEL: n
Information only. Displays
number of log entries in SEL.