HPE ProLiant Gen9

Action
Install the power supplies in a supported configuration. For more information, see the user guide on the
Hewlett Packard Enterprise website.
1626-Unsupported Power Supply Configuration
Symptom
1626-Unsupported Power Supply Configuration – Unsupported Power Supply detected. Action: Replace the
unsupported Power Supply.
Cause
An unsupported power supply is installed in the .
Action
1. Remove the power supply.
For more information, see the maintenance and service guide on the Hewlett Packard Enterprise
website.
2. Install a supported power supply.
For more information, see the user guide on the Hewlett Packard Enterprise website.
To locate a supported option, review the product QuickSpecs on the Hewlett Packard Enterprise
website.
1627-Power Supply Configuration Insufficient
Symptom
1627-Power Supply Configuration Insufficient. Install one or more power supplies to meet power
requirements, or press the F9 key to enter System Utilities to override requirements if Power Advisor indicates
this is possible.
Cause
The current power supply is not sufficient to operate the .
Action
For more information, see "Insufficient power supply configuration" in the HPE ProLiant Gen9 Troubleshooting
Guide, Volume I on the Hewlett Packard Enterprise website.
1628-IMPORTANT: The system contains multiple types of power supplies
Symptom
1628-IMPORTANT: The system contains multiple types of power supplies. Certain features are not supported
and power redundancy may be limited.
Cause
More than one type of power supply is installed in the .
112 1626-Unsupported Power Supply Configuration