The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message ID: 24797
Severity: Informational
Log message: The <drive type> physical drive located in bay <bay number> has passed
a pre-defined usage threshold. It currently has <days or percent> <days of /
percentage> usage remaining. Indicates that the drive is approaching the maximum
usage limit for writes (wear out). This drive can be found in box <box number>
which is connected to port <port number> of the array controller <controller
name / slot information>.
Message ID: 24798
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that the <drive type> physical drive located in
bay <bay number> has passed a pre-defined usage threshold.
It currently has <days or percent> <days of / percentage> usage remaining.
Indicates that the drive is approaching the maximum usage limit for writes (wear
out).
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message ID: 24799
Severity: Warning
Log message: The <drive type> physical drive located in bay <bay number> could not
be authenticated as a genuine HPE hard drive. This drive's status LEDs will not
be controlled. This drive can be found in box <box number> which is connected to
port <port number> of the array controller <controller name / slot information>.
Message identifiers 24800-24808
Message ID: 24800
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that the%3physical drive located in bay <bay
number> could not be authenticated as a genuine HPE hard drive. This drive's
status LEDs will not be controlled.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message ID: 24801
Severity: Informational
Log message: Array controller <controller name / slot information> has reported
that its cache is missing. This is an unsupported configuration.
Message ID: 24802
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that its cache is missing. This is an
unsupported configuration.
222 Message identifiers 24800-24808
To Next Page
Loading...
