HPE ProLiant Gen9

1 - Amber 2 - Green 3 - Green Interpretation
On On Off The current backup is complete, but power
fluctuations occurred during the backup.
On On On The cache module microcontroller has
failed.
Smart Array Windows Event Log messages
Message identifiers 24578-24599
Message ID: 24578
Severity: Informational
Log message: The Smart Array SAS/SATA event notification service version %1.
Message ID: 24579
Severity: Informational
Log message: An event queue overflow has occurred for the array controller
<controller name / slot information>. At least one event has been lost. This
controller will only queue up to 100 events.
Message ID: 24580
Severity: Error
Log Message: The Smart Array SAS/SATA Event Notification Service needs to be
upgraded and cannot process events at this time. The service is being stopped
and processing of Smart Array controller events to the Windows system event log,
ProLiant Integrated Management Log (IML) and Integrity System Event Log (SEL)
will not occur until the software is updated.
To upgrade your software, please visit http://www.hpe.com/support/drivers
Message ID: 24581
Severity: Informational
Log message: The Smart Array SAS/SATA event notification service <status message>.
<status message> values:
• “has encountered an error and has stopped”
• “has stopped due to a message file error”
• “was not able to update the service control manager with updated status”
• “cannot open a registry parameter key”
• “cannot start due to system event logging being disabled”
Message ID: 24582
Severity: Informational
Log message: A <drive type> physical drive located in bay <bay number> was
<inserted / removed>. The drive can be found in box <box number> which is
attached to port <port number> of array controller <controller name / slot
information>.
172 Smart Array Windows Event Log messages